Cleaning agents used in ALKAA Tuff High Foam for hold cleaning solution is fully biodegradable and not be harmful to the marine.  Allow the ALKAATUFF High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of ALKAATUFF makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.

Heavy Soil deposition                    Use Undiluted or up to 5% dilution with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

It can be use as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
 

General Cleaning Method :

Step 1:  Spraying the  ALKAA Tuff High Foam concentrate over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet after 10-20 minutes

After the ALKAA Tuff High Foam concentrate has been  sprayed on the surface and  before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the ALKAA Tuff High Foam thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of ALKAA Tuff High Foam concentrate substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of ALKAA Tuff High Foam concentrate in correct dosages is half the job done.

Note:- For boiler  fire  side  cleaning, a 10-20 % hot  solution, (temp. above 40°C),  should   be  sprayed on  to  the surfaces to be cleaned. Allow to  penetrate for 20 minutes and flush off. For deposits  which are very hard to remove, increase the concentration to 50% and repeat if necessary.