Disc Separator Cleaner
Separator Cleaner
An extremely effective for removal of burnt grease, carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters. Also SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) NOTE:- Mechanical cleaning ( Scrubbing and Bru
Key details
| Generic name | Separator Cleaner |
|---|---|
| Active matter (%) | 98-99 |
| Standard packing | 25.00 Ltr. |
| Available pack sizes | Discclean Filter cleaner available in 5 Ltr, 20 ltr, 25, 50, 210 Ltr PACKS |
| Supply locations | Disc Separator Cleaner manufacturer, Exporter and supplier in Mumbai, Gandhidham Kandla Surat, Kolkata Haldia, Ennore Chennai, Vizag Visakhaptnam, Fujairah, Abudhabi, Ajman, Dubai, Sharjah UAE Middle East, Sohar, Barka Muscat Oman, Kenya Africa, Canada, Sudan Yemen |
Need this product at your port or plant?
Enquire Now50
For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-025 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-025 for 15 minutes to 3 Hrs. At 50 to 60°C ( Heating is not necessary ) .
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately.
NOTE:-
Recirculation and heating will improves the cleaning action.
For Heavy Duty Cleaning
Separator Cleaner can only be used for cleaning stainless steel separator discs. Fill a stainless steel or plastic container with pure Separator Cleaner. Immerse the stainless steel discs in the container and let the product act for 30 minutes up to a maximum of 2 hours. Heating the product is not necessary. Do not put the discs closely packed into the liquid but take care that there is enough space between them so that the product can work properly. Remove the discs from the bath (wear rubber gloves) and rinse with a powerful water jet. The cleaned separator discs can be used immediately.
Separator Cleaner is a colorless, strong acid, liquid cleaning agent with strong degreasing properties. This product can only be used on austenitic stainless steel and is corrosive on all other metals.
Specific Gravity (20°C) : 1.03 to 1.04
Flash point : None
pH (1% solution) : < 2
IMO-Code : 8-2031-T700.
NATURE OF SPECIAL RISKS AND SAFETY ADVICE
In accordance with the latest E.E.C. Council directives:
R 36 : Irritating to eyes and skin.
S 2 : Keep out of reach of children.
S 28 : After contact with skin rinse immediately with plenty of water.
Cleaning of Disc separator increasing clean oil separation efficiency to the engine which is directly increasing work out put of engine. More Detail of disc cleaner like MSDS and technical bulletines are available on through this LINK http://rxmarine.com/disc-cleaner-i-0 link .
PURIFIER DISC CLEANER is a concentrated liquid mixture especially designed to remove carbonaceous deposits from all types of lube and fuel oil separators. Its unique dual mechanism also helps to dissolve RUST from metal parts.
Keep container tightly closed to avoid contamination and always refer MSDS of Disc cleaner, before any kinds of application. MSDS of DISC Cleaner give full guideline to handle as per international rules and regulation.
Disclean removes the heavy tenacious deposits which collect in fuel and lube oil centrifugal separators and can be use as Rust Removing chemicals as well as for Passivating of spare parts.
Related products
Product FAQs
From our blog
Need Disc Separator Cleaner for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote