Electrode Storage Solution
DO NOT store your pH electrode in distilled or deionised water as this will cause ions to leach out of the glass membrane and reference electrolyte, causing a slow and sluggish response.
Key details
| Standard packing | 1.00 Bottle |
|---|---|
| Available pack sizes | 100ml, 200ml, 500ml, 1 ltr. |
| Supply locations | Electrode Storage Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Electrode Storage Solution at a competitive price from us. We have ready stock of Electrode Storage Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders. |
Need this product at your port or plant?
Enquire Now<p style="text-align: justify;">
<strong>Storage of the pH electrode when not in use : </strong>The electrode bulb needs to be moist at all times. When you are done with the electrode pour, electrode storage solution into the cap that came with the electrode and put the cap over the bulb of the electrode. Keep the cap on until next use. If the electrode is being stored for a long time you may want to check the cap to be sure the storage solution is still in the cap and keeping the bulb moist. </p>
<p style="text-align: justify;">
<strong>Rinsing the electrode between measurements. </strong>You should rinse your electrode between measurements. This can be done with distilled water or rinsing with a sample of the next solution to be measured. Using both distilled water and then a sample of the next solution is also a good way to rinse the electrode between measurements.</p>
<p style="text-align: justify;">
<strong>pH electrode fill hole : </strong>Some electrodes have a fill hole for refreshing the electrolyte in the electrode; other electrodes do not have a fill hole. If your electrode has a fill hole the fill hole cap should be removed during calibration and use. This allows for the correct amount of reference electrolyte to flow into the sample. Replace the fill hole cap when done with the electrode at the end of the day.</p>
<p style="text-align: justify;">
<span style="text-align: justify;">Immerse probe in Electrode Storage Solution, making sure entire probe stays submerged. After storage, rinse with clean tap water or distilled water before using. Store at room temperature between 20°C – 25°C. Clean the probe with Electrode Cleaning Solutions before storage if probe has been immersed in several nutrient solutions without cleaning.</span></p>
<p>
Physical Properties :</p>
<table border="1" cellpadding="1" cellspacing="1" style="width: 255px; height: 162px;">
<tbody>
<tr>
<td>
Appearance</td>
<td>
:</td>
<td>
Colorless liquid</td>
</tr>
<tr>
<td>
Odor</td>
<td>
:</td>
<td>
Odorless</td>
</tr>
<tr>
<td>
Density at 20 °C</td>
<td>
:</td>
<td>
1.02 g/cm³</td>
</tr>
<tr>
<td>
pH</td>
<td>
:</td>
<td>
5-7</td>
</tr>
<tr>
<td>
Boiling Point</td>
<td>
:</td>
<td>
> 100 °C</td>
</tr>
<tr>
<td>
Flash Point</td>
<td>
:</td>
<td>
NA</td>
</tr>
<tr>
<td>
Solubility</td>
<td>
:</td>
<td>
Complete soluble</td>
</tr>
</tbody>
</table>
<p style="text-align: justify;">
<strong style="text-align: justify;">DO NOT STORE THE pH ELECTRODE IN DISTILLED WATER.</strong><span style="text-align: justify;"> Storing the pH electrode in distilled water will shorten the life of your pH electrode. If you do not have electrode storage solution, temporary use pH 4 buffer solution.</span></p>
Related products
Need Electrode Storage Solution for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote