ALCLEAN PBC
ALKALINE TANK & DEPOT CLEANER |
________________________________________
It is a tank cleaning product with efficient oil removing qualities which is used for the removal of dry and semi-dry oils from stainless steel, epoxy and polyurethane tanks.
Area of Use:
It is a tank cleaning product with efficient oil removing qualities which is used for the removal of dry and semi-dry oils from stainless steel, epoxy and polyurethane tanks. It may also be used for cleaning oily contamination on depot surfaces following PBC, coal and pet-coke drainage. Alclean may be used for a vast array of purposes such as disinfection and deodorization of tanks after vegetable and animal freightage or deodorization following a solvent-based tank cleaner.
Qualities and Benefits:
- The product is an alkaline tank cleaner with highly efficient cleaning qualities, containing biodegradable surfactants and cleaners.
- Non-inflammable
- It doesn’t contain hazardous chemicals
- It doesn’t have a corrosive effect on ferro-metal or epoxy tanks.
- Quickly penetrates deep into and cleans animal and vegetable oils inside the tank
- Easily rinsable leaving no residues on tank surfaces
- IMO certified.
Usage:
1) Circulation method: Alclean should be turned into a solution by 1-3 % dilution in the PBC circulation tank. Its application is enough to clean 3 up to or 4 tanks, while the solution recipe with Alclean depends on the contamination level and the number of tanks. Surfaces are rinsed with water following application
2) Injection Method: Alclean should be mixed with a ration of 3 to 5 liters for each ton of washing water manually or with a dosing pump. The solution temperature during the PBC tank washing phase should be between 70 and 80 °C. Following application, surfaces are immediately rinsed with water at the ambient temperature.
Safety Measures:
Use protective glasses and gloves during application. Pulverized state is not to be inhaled. The product is irritant. Under no circumstances should it be swallowed. In case of ingestion, consult a doctor. Do not bring into contact with skin. In case of exposure, wash your skin and eyes with water and soap. Consult a doctor if necessary.
The above tank washing recommendations are basic and may vary depending on the tank capacity of the vessel, qualities of the goods transported and the following goods well as time requirements. Please consult our technical experts for washing procedures and recommendations.
Package: 25 & 210 liter plastic barrels.
Properties:
Appearance : Light yellow liquid.
Specific Weight : 1,15-1,20 g/cm3 ( at 20 ºC )
pH : 13-14
Flashing Point : -
Corrosive Effect : Don’t apply on aluminum, zinc or alloys.
Refer to MSDS for personnel health and safety before use.