Coolant Premix Redcool

Sewage Chemicals Treatment-40

Coolant Premix Redcool

Premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to i

Key details

Standard packing 25.00 Ltr.
Available pack sizes 20 Ltrs, 25 Ltrs, 210 Ltrs.
Supply locations Coolant Premix Redcool manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Coolant Premix Redcool at a competitive price from us. We have ready stock of Coolant Premix Redcool in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Need this product at your port or plant?

Enquire Now
Application

RXSOL REDCOOL is compatible with materials normally used in automotive cooling systems which include rubber hoses, gaskets, rubber seals and plastic components.

Caution: RXSOL REDCOOL is premixed to the correct percentage of glycol concentration. DO NOT top up with water as it will reduce the glycol and corrosion inhibitor concentration and accordingly reduce the protection provided, increasing the risk of damage to your cooling system and engine problems.

RXSOL REDCOOL could soften some types of painted finishes. In the event of a spillage, wash off with water immediately, do not wipe off. First Aid If RXSOL REDCOOL is accidentally swallowed, contact a doctor or the Poisons Information Centre in your State. Induce vomiting. Use Ipecac Syrup.

Using Procedure

Drain and flush previous fluid according to the instructions provided by the vehicle manufacturer. For best results set heater controls to “HEAT” whilst this is carried out.

To remove traces of old fluid, flush the system with clean water.Remove drain plug or bottom radiator hose as appropriate. Hoses other than the bottom radiator hose may need to be removed to ensure all the old coolant is removed..

RXSOL REDCOOL can be used as either a top-up or complete fill without the danger of diluting coolant concentrations. DO NOT ADD WATER to the cooling system when refilling, only add RXSOL REDCOOL .

RXSOL REDCOOL  provides effective corrosion and freezing point protection to -210C. Start and run engine for 5 minutes to circulate the fluid. Check for leaks and top-up system with RXSOL REDCOOL  if required. For maximum system protection, replace RXSOL REDCOOL  at least every three years or 60,000 km

Technical Specifications

Typical Characteristics

 

pH Reserve
Alkalinity mL
Boiling Point
(undiluted) 0C
Freezing Point Density @
200C kg/L
7.9 5.8 120 -37 1.05 - 1.09

 

Note

Product Features & Benefits

  • Improved engine corrosion protection helping to resist theformation of rust while protecting alloy heads and engines.
  • Improved protection against cavitation in water pumps and hot spots (eg. behind exhaust ports) in aluminium cylinder heads.
  • Excellent HOT weather protection. RXSOL REDCOOL helps prevent the risk of the engine coolant boiling, leading to coolant loss and possible engine damage.
  • Excellent COLD weather protection.RXSOL REDCOOL reduces the real risk of coolant freezing solid in the engine cooling system and severely damaging engines and/or radiators.
  • Due to the above features and benefits, maintenance costs are minimised.
  • Easy to use

Performance Levels

RXSOL REDCOOL  meets the following requirements:

  •  ASTM D3306                                General Motors GM 1825 M
     
  •  ASTM D4985                                General Motors GM 1899 M
     
  •  SAE J1034                                    Mazda MES MN 121A C-FA04
     
  •  AS 2108-84                                   MWM Die sel D234 2/15
     
  •  BS 6580                                         SAAB FSD 8704
     

Health, Safety & Environment

RXSOL REDCOOL  is considered non-hazardous according to Worksafe.However, in line with safe handling practices, it is recommended that the handling instructions outlined in the  Material Safety Data Sheet be followed.

Disposal:Oily materials must not be allowed to enter groundwater, watercourses, sewerage or drainage systems. Refer to local Waste Disposal Authority for legal requirements.

Product Removal

Bare Metal Surfaces : Remove with RXSOL DEGREASER.

Hand Cleaning : Remove with RXSOl HAND CLEANER

Other Surfaces : Contact your local Special Products Division in each State Office.

Although all reasonable care has been taken to ensure that the information contained in this publication is accurate as at the time of printing, such information is nevertheless liable to variation in the event of changes occurring subsequent to the date of printing it: the blend formulation, methods of storage, or due to the improper handling or application of any of the products referred to, or in the requirements of any specification or approval relating to any of the products.

Product video

Watch on video

Related products

Need Coolant Premix Redcool for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a Quote