Drilling Fluids :
The chemical CaSO4, which occurs naturally as the mineral anhydrite. Gypsum is the dihydrate mineral form, CaSO4·2H2O.
How to clean Die and Mould in aluminium Extrusion company, In general H13 die steel used for extrusion; After completion of the extrusion process, the die needs to be cleaned by removing of remaining aluminium on the die.
RXSOL 4000 is a multicomponent, multifunctional formulation which prevents corrosion, microbiological growth in single product treatment programme. Inhibitor, corrosion, multicomponent, multifunctional: For prevention of corrosion and microbiological growth in water flood systems during hydrostatic testing and other applications.
Hydrazine Hydrate Amine used as Oxygen scavenger on ultra high pressure industrial sites
No oxygen is entering the boiler with the feed water when hydrazine is present in the water.
The incoming water passes over a series of SPECIALIZED RESIN BEADS which remove mineral ions and other impurities from the water. This is why Demineralised Water is also known as Deionised Water; the process removes minerals and ions leaving water which is de-mineralised or de-ionised. Demineralised Water is also known as Demin Water, DI Water and DIW.
RXSOL Demineralised Water Manufacturer and supplier in India, Muscat, UAE Middle East Kenya, Canada
Email : mail@rxmarine.com
USES:
Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.
DILUTION RATIOS:
DIRECTIONS: Dilute with 5 to 50 parts of water Apply working from the bottom up (Applying from the bottom up avoids streaking) Do not allow to dry on the surface Rinse area before starting on to the next area Do not use on aircraft. On anodized or highly polished aluminum, magnesium, glass or ceramic. If contact is made rinse off immediately with water.
RXSOL-16-1028-025 contains no complexing agents therefore your water treatment system can function undisturbed and optimally precipitate heavy metals.
USES:
Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.
DILUTION RATIOS:
Dosing rate varies as per bunker and engine / Boiler system structure....
RATIO : 1:1000 - 3000 ( 1 Ltr / 1-3 MT ) : dosage rate based on specific problems and requirements can be exceed up to 1:1000, 1:6000 and 1:12000
It can be used as a general purpose cleaner to remove oil and grease deposits.
Using Procedure:
Using Procedure:-
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2008-HCF is by direct injection followed by recirculation washing, using tank cleaning machines.