Coolant
Part No. RXSOL-27-4004-005
GLYCOL BASED COOLANT
Useful in Preventing Cavitation Corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life.
Key Technical Details
| Part number | RXSOL-27-4004-005 |
|---|---|
| Generic name | GLYCOL BASED COOLANT |
| Standard packing | 5.00 |
| Available pack sizes | COOLANT Corrosion inhibitor Concentrate |
| Supply locations | COOLANT Manufcaturer and supplier in INDIA - UAE MIDDLE EAST GULF, OMAN, Nairobi Kenya, Sudan, Yemen. RXSOL COOLANT RXSOL-40-4004-025 exporter and supplier in Mumbai, Surat, Gandhidham, Kolkata, Chennai, Vizag Visakhapatnam, Paradip, Fujairah, Ajman, Abudhabi, Sharjah, Dubai, RUWI, Barka, Muscat, Sohar, Oman, Canada |
DIESEL ENGINE WATER TREATMENT SUITABLE FOR ALUMINIUM, ALLOYS AND YELLOW METALS
RXSOL-40-4004 is an inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives.
• High performance corrosion inhibitor
• Being a nitrite free product it is compatible also with zinc - coated piping
• Easy control test with refractometer.
Fields where Coolant Engine Guard is used:
- Diesel engine and generator cooling systems
- Marine engine cooling systems
- HVAC chillers and heat exchangers
- Industrial closed-loop cooling circuits
- Stationary power plant engines
At concentration of 10% by volume,RXSOL-40-4004 affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.
PHYSICAL DATA
Appearance : Clear liquid
Density : 1.096 g/cm3
Product pH neat: 9.5
Corrosive action: None
- Anti-freeze Protection to -34 to -40°C
- Corrosion Protection for cast iron, steel, copper, brass, solder, and aluminum
- Thermal Stability for high-temperature operations
- Nitrite-based Inhibitor ensures long-term rust prevention
- Low Foam, Low Toxicity compared to traditional inhibitors
- Compatible with most sealants, elastomers, and metals
DOSE
The coolant should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water,mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the
following limits:
Water hardness : 0 - 100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.
Need Coolant for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote
