FLOCCULANT 85113
Bayer process Flocculant
Flocculant is a very effective liquid treatment based on Poly chloride to separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.
Key details
| Generic name | Bayer process Flocculant |
|---|---|
| IMPA code | mr prashant / AARCHIsha |
| Active matter (%) | 90 |
| Standard packing | 210.00 Ltr. |
| Available pack sizes | 25, 50, 210 ltr |
| Supply locations | FLOCCULANT 85113 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of FLOCCULANT 85113 at a competitive price from us. We have ready stock of FLOCCULANT 85113 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders. |
Need this product at your port or plant?
Enquire Now<p style="text-align: justify;">
<span style="text-align: justify;">International environmental regulations set strict rules as to the oil content in effluent water from ships. To meet these regulations, a combination of mechanical and chemical cleaning is necessary. Bilge Water Flocculant is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.</span></p>
<p style="text-align: justify">
<strong> </strong></p>
<p style="text-align: justify">
Typical dose rate: 100 - 500ppm (0.1 - 0.5 litre/m3 of water) In a multistage bilge water cleaning system, Bilge Water Flocculant is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.<br />
</p>
<p>
<strong>Further Technical Data</strong><br />
Form Liquid<br />
Appearance Clear<br />
Density 1.3<br />
pH, in conc. 1.3<br />
Not Compatible Corrosive to cast iron as concentrate. Non-corrosive to all metals at use concentration.</p>
<p>
<strong>Features</strong></p>
<ul>
<li>
Cost-effective bilge water treatment based on specially selected Poly Aluminium Chloride</li>
<li>
Iron-free. Completely safe to the environment</li>
<li>
Acts by both breaking the oil-in-water emulsion and by building flocs</li>
<li>
Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil</li>
<li>
Remaining oil sludge can be burned onboard or pumped ashore-contains very little water</li>
<li>
Low dosage, economical use</li>
<li>
Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals</li>
<li>
Approved by manufacturers of bilge water cleaning systems</li>
</ul>
Related products
Need FLOCCULANT 85113 for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote