HCF Cleaner
Part No. RXSOL-20-2007-025
Neutral Surfactant for cleaning of vegetable oils, fish oils, tall oils,tug oil etc
Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter .It is free from hydroc
Key Technical Details
| Part number | RXSOL-20-2007-025 |
|---|---|
| Generic name | Neutral Surfactant for cleaning of vegetable oils, fish oils, tall oils,tug oil etc |
| Active matter (%) | 69 - 72 % |
| Standard packing | 25.00 |
| Available pack sizes | 20, 25, 50, 210, 1000 Ltr IBC TANK. Feel free to mail us for factory discounted price. STOCK available at Mumbai, Kandla, Surat, Goa, Tuticorin, Visakhapatnam, Gangavaram, Ennore, Chennai, Kolkata, Haldia, Fujairah - Dubai, Middle East |
| Supply locations | RXSOL HCF Remover | Hydrocarbon-Free Marine Tank Cleaning Chemical Manufacturer RXSOL HCF Remover is a powerful low-foaming marine tank cleaning chemical for removing hydrocarbon residues, animal oils, vegetable oils, grease and sludge. Supplier in India, UAE and Oman. Tank Cleaning Chemical Manufacturer and supplier in Mumbai, Kandla, Mundra, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi, Muscat and Sohar. HCF Remover is a cleaning chemical, not a guarantee that a tank is hydrocarbon-free or gas-free. Tank acceptance requires appropriate inspection and testing. Follow the current SDS, coating compatibility requirements, enclosed-space entry procedures and applicable wash-water disposal regulations. HCF Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of HCF Cleaner at a competitive price from us. We have ready stock of HCF Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders. |
Applications
-
Cargo tank cleaning after petroleum and chemical cargoes.
-
Removal of animal oils, vegetable oils, fish oils and tall oil residues.
-
Cleaning tanks contaminated with grease, wax and oily sludge.
-
Removal of soot, carbon deposits and general grime.
-
Cleaning of stainless steel and compatible coated cargo tanks.
-
Final cleaning stages before hydrocarbon-sensitive cargoes.
First of all flush the system with water to stop evaporation rates and polymerization effect of oil, then can be adopt most economical method of using RXSOL-20-2007-025 is by direct injection followed by recirculation washing, using tank cleaning machines.
Recommended Cleaning Procedure
1. Initial Washing: Flush cargo tanks with cold water to remove loose residues and reduce the risk of polymerization of drying oils.
2. Chemical Cleaning: Prepare an appropriate dilution of RXSOL HCF Remover according to the cargo residue, tank coating and approved cleaning procedure.
3. Recirculation: Circulate through tank cleaning machines, ensuring suitable filtration or straining.
4. Spot Cleaning: For persistent residues, apply the cleaner directly and allow approximately 10–45 minutes of contact without letting it dry.
5. Final Rinsing: Wash thoroughly with fresh water, inspect the tank and confirm that residues and foam have been removed.
The published application instructions also describe warm-water washing at approximately 60°C for suitable systems. Temperature limits must be checked against tank coating specifications.
RXSOL TANK CLEANER
Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-025 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions are followed when handling / spraying HCF **
Injection Method:– Not applicable.
Re-circulation Method:–Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower Butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.**
Typical Technical Properties
|
Parameter |
Published / Indicative Value |
|---|---|
|
Appearance |
Clear to yellowish liquid |
|
pH |
Above 7 |
|
Specific Gravity at 20°C |
Approx. 1.01 |
|
Water Miscibility |
Fully miscible |
|
Foaming |
Low |
|
Cleaning Chemistry |
Non-ionic surfactants and glycol ethers |
RXSOL – Manufacturer & Supplier of Tank Cleaner
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-025 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents.
Note:- Completely miscible with sea water.
COLD water is recommended for drying or semi-drying oils to flush the tank as prewash. Chemical expert suggest that cold water should be carried out immediately after discharge of cargo to prevent hardening of oil residues. Otherwise if oil is nondrying then Prewash of the tank with hot water at 50˚C is good decision to achieve BEST cleaning result.
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate coatings and from most metal surfaces (ferrous alloys, tin, zinc, aluminium and galvanized surfaces).
Related products
Product FAQs
Need HCF Cleaner for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote.jpg)
