<p>
<u>Manual Cleaning</u></p>
<p style="text-align: justify;">
For manual cleaning of separator parts and machinery parts.Make a solution between 5-20% concentration depending on how dirty Tank and  equipment to be cleaned is. Both oil and lime will be solved with time, let soak for at least 2 hours. After 2 hours the parts can be cleaned using by High Pressure Machine rinsing or brushing.</p>
<p>
<u>Cleaning In Place of Separator</u></p>
<p style="text-align: justify;">
For the lube oil separator use a 20% solution</p>
<p style="text-align: justify;">
For the fuel oil separator use a 10% solution</p>
<p style="text-align: justify;">
Recommended cleaning temperature is 70-90oC (158-194oF). A normal cleaning cycle is between 1 to 3 hours depending on the dirtiness and character. If the separator has very hard deposits the cleaning cycle may have to be repeated with new cleaning fluid.</p>
<p style="text-align: justify;">
Lube Oil Tank :</p>
<ul>
<li style="text-align: justify;">
Instead of recirculation cleaning the  RXSOL  Lube Oils Cleaner  can  injected into the Butter   worth system . Kindly make the solution 0.5 -5% and inject same. Depending on the tank size  and  height  fill  the  necessary  amount of  freshwater or  seawater  into  the  service  tank .</li>
<li style="text-align: justify;">
Butter worth all tanks to be  cleaned 1-1,5  hour  using  the water from the service tank .</li>
<li style="text-align: justify;">
Heat  the  water by  means  of  heating  coils,  cargo  heat exchanger or going via the Butter worth heater.</li>
<li style="text-align: justify;">
The pre-cleaning temperature should be between 70 and 80°C.</li>
<li style="text-align: justify;">
Pump the waste water from the tanks to be cleaned back to service tank (overtop).</li>
</ul>