Sea Chest Antifoulant Aquasperse
Part No. RXSOL-16-1599-020
Sea Chest Organic Growth Controller
Biocide against sea growth in inlets, pipelines and heat exchangers
Key Technical Details
| Part number | RXSOL-16-1599-020 |
|---|---|
| Generic name | Sea Chest Organic Growth Controller |
| Active matter (%) | 80 |
| Standard packing | 25.00 |
| Supply locations | Sea Growth Treatment Biocide manufacturer supplier in Mumbai, Kandla, Kolkata, Chennai Vizag. Sea Growth Treatment Biocide manufacturer supplier in Fujairah, Dubai, Jebel Ali, UAE. Sea Growth Treatment Biocide manufacturer supplier in Muscat, Sohar, Duqm, OMAN. |
- Sea chests
- Seawater cooling systems
- Strainer boxes
- Filter boxes
- Seawater pipe lines
- Heat exchangers
- Central cooling systems
- Static or flowing seawater systems
Ensure all systems are completely free of marine growth prior to applying AQUASPERSE RXSOL. Where required, pre-clean using DESCALING LIQUID EXTRA or RXSOL Safe Acid DESCALEX POWDER. Marine organisms require a surface to anchor; if existing growth is not removed beforehand, it will continue to provide a base for further attachment even after AQUASPERSE RXSOL Sea Chest Antifoulant dosing.
SEAWATER COOLING SYSTEMS
Inject AQUASPERSE into the sea chests using dosing equipment once every two days for a duration of one hour, adjusted according to the seawater flow rate of the system. In harbour conditions or areas with high shellfish activity, increase dosing frequency to once daily.
A concentration of 3 ppm AQUASPERSE RXSOL is adequate for fouling prevention. This corresponds to a dosage of 0.3 litres per 100 tons per hour of seawater flow.
DEEP SEA VESSELS
Dose RXSOL AQUASPERSE into the suction box or strainers at a rate of 0.3 litres per 100 tons of flow, applied over one hour every 48 hours.
COASTAL VESSELS
Meter AQUASPERSE into the suction boxes or strainers at 0.3 litres per 100 tons of seawater flow, distributed over a 24-hour period.
Example:
For a circulating pump capacity of 250 TPH, the required dosage is:
0.3 × 2.5 = 0.75 litres of AQUASPERSE for one hour.
| Parameter | Value |
|---|---|
| Appearance | Clear to pale yellow liquid |
| Odor | Mild characteristic |
| Specific Gravity | 1.05 – 1.15 |
| pH | 4.0 – 6.0 |
| Solubility | Completely miscible in seawater |
| Flash Point | Non-flammable |
| Active Ingredient | Marine-grade broad-spectrum biocide blend |
| Stability | Stable under normal storage |
For best performance, the system should be as clean as possible before starting routine antifoulant treatment. Heavy deposits, scale or established marine growth should be removed through suitable cleaning/descaling procedures before application.
General preventive dosing:
Dose into sea chest, suction side, strainer box or designated injection point using suitable chemical dosing equipment.
Typical treatment guidance:
A preventive dose may be applied based on seawater flow rate and vessel operating conditions. Treatment frequency can be increased in harbour operations, warm waters, or areas prone to heavy marine growth.
Indicative example format:
For systems with known seawater circulation rates, dosing can be calculated proportionally per 100 tons/hour of seawater flow.
Important:
Final dosage, frequency and compatibility should be validated by RXSOL technical team before release on TDS/PDS and before onboard use.
Features and benefits of using RXSOL Sea Chest Antifoulant
-
Helps prevent fouling caused by marine growth
-
Supports cleaner seawater cooling circuits
-
Helps maintain heat transfer efficiency
-
Reduces blockage in strainers and seawater lines
-
Can lower cleaning frequency and maintenance downtime
-
Suitable for routine preventive treatment
-
Easy-to-dose liquid formulation
- Suitable for deep sea and coastal vessel operations
- Strong broad-spectrum biocidal activity against bacteria, algae, fungi, and marine microorganisms
- Prevents blockages in sea water inlets, strainers, filters, and pipelines
- Protects heat exchangers and improves efficiency by eliminating biofilm
- Reduces maintenance downtime and cleaning frequency
- Compatible with common metals found in marine systems
- Fast acting, suitable for both shock dosing and continuous dosing
- Non-foaming and stable in sea water salinity
Need Sea Chest Antifoulant Aquasperse for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote
